7 Tips That Will Make You Guru In Led Lights

Whereas the marketplace for colored (Red, Green, Blue) RGB LEDs is more developed, the marketplace for white LEDs continues to be growing. Why? Once you think of industries that still rely on white, non-LED lighting, such as for example televisions, automotive manufacturers, computer monitors, mobile computing, LCD backlights, etc., it is possible to understand the push to end up being the leader in white LED manufacturing.

Lots of people are surprised that a business would avoid a revenue generating opportunity that converting a house or business to LED would create. However, because replacement white LED bulbs and retrofits are finally available, does not mean that they should be on your own immediate grocery list. In very easy terms, the marketplace for colored and color-changing LEDs is mature. While engineers remain finding ways to make sure they are brighter and more efficient, the ultimate goal of the LED industry is in developing volume production of high-efficiency, high-brightness white LEDs.

It may be easier to think about colored LEDs (RGB) and white LEDs with regards to another industry: Automotive. RGB LEDs are like the internal combustion engine: Reliable, abundant, user friendly and manufacture, and fairly well toned in terms of the potential for new or breakthrough technologies. There are lots on manufacturers and each has their own set of patents and “tricks of the trade” to greatly help give themselves some marketing leverage over the competition. White LEDs are like the alternative energy industry for transportation: Quite varied, still relatively “new”, still having to be market proven, more costly, more challenging to manage.

There are several manufacturers, each utilizing a different technology or mix of technologies to accomplish what they believe may be the “the next big thing.” Third , analogy, RGB LEDs are mature enough to compete on cost alone and the drop in costs is what fuels new applications for colored LEDs that had not been thought of previously. White LEDs, however remain developing technically and should not be shopped based on cost alone. The necessity for quality and longevity is what fuels the further research and development into white LEDs.

11 THINGS TO CONSIDER IN DETERMINING LED UPGRADES

Because there are so many variables that need to be considered, making a fast and simple recommendation about transitioning to white LEDs is not possible. To obtain a jump start on the near future, consider every lighting source in each room and establish what it’s primary purpose is. After you have done this, review the following items to help determine where on the priority purchase-list each replacement ought to be. Below are a few general ideas to help you determine if an LED upgrade is the right choice for you personally:

1.) Is the lighting located in a house where the primary resident is older or has mobility issues?

If the LED replacement produces adequate light levels, LED alternatives are ideal for use in homes where safety is really a top priority. Understanding that an ill or older person won’t need to change a burned-out lamp again can offer peace-of-mind.

2.) Is initial cost a primary element in determining if you are going to upgrade?

The existing nature of the white LED market implies that prices are still relatively high, especially compared to traditional lighting. As an early adopter means paying a premium; are you more comfortable with knowing you could have paid less for the same technology if you had waited?

3.) Is the light located in bright daytime sunlight or an area of high heat?

High levels of heat will noticeably shorten the lifespan of any LED, especially white LEDs. When considering LEDs, try to make sure that both the fixture and the positioning enable adequate passive cooling to avoid color-shift and longevity issues. That is a much bigger concern when contemplating retrofit bulbs versus considering a “total package” LED fixture and lamp.

4.) Are Round Led High Bay Lights needing to reduce the heat output from the traditional light source?

In bathrooms, laundry rooms and small spaces, conventional lighting can produce uncomfortable heat. LED lighting is great for these areas since they produce no heat and because affordably illuminating smaller areas with LEDs presents significantly less of a challenge.

5.) May be the lighting located in a location of rough service or environmental extremes?

Garage door openers, unheated/cooled utility rooms and outdoor workshops place extreme demands of lighting equipment. Vibrations that can break a lamp filament and cold temperatures that can cause a fluorescent tube to flicker are of no consequence to LED lighting, making these replacements a simple decision.

6.) May be the brightness critical to the application?

LEDs are directional by nature, so attempting to meet a specific brightness expectation over a wide area is not the very best usage of LED lamps. The existing crop of standard fluorescent tubes or high-bay lighting is going to be better for these applications.

7.) Are you trying to retrofit a preexisting lighting fixture to accommodate an LED replacement?

Most current lighting fixtures are made to capture and reflect just as much light as you possibly can from conventional light sources that produce light from all 360 degrees. Because LEDs emit very directional light, there are often many compromises that must be made by manufacturers in order to make LEDs “work” for the best amount of retrofits. When possible, rather than retrofit bulbs look at a “total package” LED lighting fixture that is designed from the ground around efficiently use LEDs.

8.) Is the light output and quality of the LED version acceptable compared to your existing lighting?

With the variety of lighting technology available (incandescent, fluorescent, LED, etc.) the only way to get a precise idea of the way the lighting will perform would be to compare the light output or lumen and color temperature specifications instead of the wattage as is typical of most of us raised with traditional lighting in the home. THE UNITED STATES Department of Energy has devised a standardized “lighting facts” label similar in concept to the nutrition label entirely on foods, to help consumers compare lighting.

9.) Are the bulbs you’re considering replacing difficult to gain access to or reach?

If they are, LED replacements are great candidates because once they are changed, you’ll likely never have to change them again since LEDs do not “burn out” such as a conventional bulb.

10.) Are you replacing all the lights in a specific area or just an individual bulb?

Unless you know the color temperature of all the lighting in the area, try to be consistent in whatever lighting technology you select. For example, if your room uses primarily halogen lighting, chances are a warm color temperature and changing an individual reading lamp to LED with a cooler lighting temperature will not only be noticeable, but may also be distracting.

11.) Does the energy savings and/or profits on return (ROI) make it worthwhile at this point?Prepare a power audit using free web calculators to determine how much money you will put away on energy and what the potential profits on return is. Just enter your time rates, the total wattage of your conventional lighting and the full total wattage of the LED lighting you are considering and the calculator will let you know exactly how much money each technology will cost you per year.

As you can see, every lighting situation should be considered individually contrary to the above checklist. Doing this will help you to determine LED upgrade plans that fit within both your budget and your expectations. In general, LED lighting will continue to improve in both output and efficiency each year like the way the non-public computer market has evolved. What could be considered a “middle of the street” LED lamp today, was more than likely considered reduced product per year or two ago. Prioritizing your LED lighting purchases so that the basics are covered first and delaying your more demanding lighting requirements because the technology improves will ensure a comfortable transition to tomorrows lighting technology.

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress | Theme: Funky Blog by Crimson Themes.